MikroTik RouterOS is the working course of action of MikroTik RouterBOARD hardware. It can in like manner be presented on a PC and will change it into a switch with all the essential features - coordinating, firewall, transmission limit the officials, remote way, backhaul interface, hotspot entryway, VPN server and that is just a hint of a greater challenge.
Access Router: Connect your Internet connect to port 1, and LAN PCs to ports 2-‐5 2. Set LAN PC IP setup to modified (DHCP) 3. Remote AP mode is enabled normally, you can interface with the SSID "MikroTik". Sign into your change from your web program by opening 192.168.88.1 in the area bar 4.Every switch is generation line pre-planned with the IP address 192.168.88.1/24 on the ether1 port. The default username is head with no mystery key. After you sign in all of a sudden, if it's not all that much inconvenience make another customer with a mystery word in the "full" gathering, re-login and eradicate the default manager customer.
Revive Router: Open Winbox and go to "System/Routerboard" menu (arrange 1 and 2 from picture below).New window "Routerboard" will jump up, where you can see present and latest available firmware.Click on "Invigorate" get (organize 3 from the image)
Setup Winbox: Download winbox from this association or accumulate winbox from any source.
Interface your PC with MikroTik Router by a RJ45 cable.Open winbox programming in your working structure and tap on interest get arranged after Connect To: input box.
Giving example as 2 routers AR and BR and supposing the and passwords
1.Take the picture of the current deafult settings. Pull out one of the cable from the router, connect it to the laptop.
2.Slide down the touchpad to the bottom and select ‘Reset Configuration’.
3.Press the Password : 1234 and then the enter button.
4.After that press ‘Yes’ to reset.
5.Then it starts rebooting.
6.The router is now reset and the defa
ult is
7.Now, just pull out the network cable from the router and laptop and put the wires back to default as it was before and then check through the network only.
8.In the ‘Winbox’, login using those credentials.
9.Click on the ‘Files’.
10.Then choose the latest file and press on ‘Restore’.
11.Password for AR is ‘Welcome1’ and for BR is ‘Asdf1’.Enter it and press ‘Restore’.
12.The dialog box for confirmation of restore and reboot appears. Press ‘Yes’.
13.After rebooting that login to winbox using ‘evit’ as login and ‘Asdf1’ as password and then press ‘connect’.
14.Then go to IP->Routes
15.Check the settings if it’s the same as this one. In this one the lowest number in the ‘Distance’ column gets the highest priority so put ‘Bypass’ first and then the ‘Public’ ones.
16.If not the same settings, change it from this one.
No comments:
Post a Comment